PEAK PRO FAQ (2024)

FAQs

PEAK PRO FAQ? ›

Soak the chamber in a jar of ISO for about 20 to 30 minutes, then take it out and let it fully dry, for another 20 to 30 minutes. ISO is flammable, so do not try to heat up the chamber until it's completely air-dried.

Soak the chamber in a jar of ISO for about 20 to 30 minutes, then take it out and let it fully dry, for another 20 to 30 minutes. ISO is flammable, so do not try to heat up the chamber until it's completely air-dried.

This should not in any way affect the overall performance of the chamber itself. The mouthpiece, battery and threading can be cleaned by wiping with a cotton swab dipped in ISO. Do not soak any gunmetal parts of the Puffco Plus in rubbing alcohol.

This can be due the glass not being properly attached or lined up to the base of the device. Even if you're getting airflow, the inlet hole may be slightly offset which is why no vapor is being transferred from the atomizer through the glass attachment.

While charging, the white light will pulse and the light will automatically turn off once the device is fully charged. A depleted battery will fully charge in approximately 2.5 hours.

To carry out this method, simply submerge your atomizer in some isopropyl alcohol for 30-60 minutes. This will cause the hardened dirt to become saturated and it will break down and pull away from the atomizer when you wipe it down with your cotton buds.

1) Pour your keif into a screen bag. with hair straightener. 3) Collect and enjoy it in your #PuffcoPro.

And while that popping/crackling sound can be unnerving — it's a battery-operated device after all — there's nothing to worry about. It's the physics of things — e-liquid meets the hot atomizer coil and starts evaporating rapidly. This doesn't happen in silence.

Vaporizing isn't just for concentrates, and you don't have to smoke your dry herbs. You can go straight to the source and vaporize whole flowers with a dry herb vaporizer.

Can you smoke flower out of a Puffco Peak Pro? The Puffco Peak Pro is a Concentrates Vape meaning it is not designed specifically for flower. The Peak Pro works best with solid extracts such as wax, shatter, crystal or dab.

Why do Puffco atomizers go bad? ›

Leaking wax can drip onto the threading of your Mod resulting in a bad connection. Black Gunk. When atomizer isn't cleaned regularly, black gunk may build up on or around the coil Connectors. This resin can become crystallized over time.

The best temperature for dabbing is anywhere between 500 and 650°F. This is the temperature for an ideal low-temp dab which preserves terpenes and fully vaporizes your concentrate, leaving behind minimal mess and the best flavors.

A fully charged Peak Pro battery should last about 30 heating cycles before needing to be recharged. Please keep in mind that using “Sesh Mode” often will deplete battery life quicker.

Not to worry, this is simply an indication that your chamber is not attached. Please try removing the chamber from the base and reattaching, making sure the chamber is fully seated and attached to the base.

The atomizer separates into four different pieces but to prevent any damage, Puffco recommends keeping it all together and dropping it into some rubbing alcohol to soak.

The answer is yes, you can use 70% alcohol to clean the Puffco Peak Pro. However, we do recommend 99%. Alcohol is an effective disinfectant and can be used to remove dirt, oil, and residue from the device.

A burnt-out coil can be soaked in ethanol or vinegar to try to soften built-up and congealed e-juice. The method of cleaning will differ depending on whether you are using a replaceable or rebuildable coil.

Step 2: Soak the Coils in Alcohol

There has been some debate as to how long you want to soak your coils in the solvent. Some vapers swear by the overnight soak for revealing dissolved gunk you didn't even know was there. But two hours is a good rule of thumb if you're in a hurry.

Well the truth is, you don't have to care too much, the Peak and Peak Pro work just fine without spinning terp pearls and you'll get a great hit. But if you want to take your extract experience to the next level then terp pearls are the way forward.

Can you dab unpressed hash? ›

Dab it on a nail.

Unpressed hashish will char before all the oil has vaporized, making the rating less accurate.

5 and 6-star bubble hash can be dabbed just like rosin. You can use a traditional dab rig and quartz banger, or something mobile and electric like a Puffco if you want to avoid the use of a torch.

The Plus battery should last an average of 30 Sesh Mode cycles on its highest setting. Frequent use on the highest (white) setting and/or Sesh Mode will deplete the battery more quickly.

Both the Puffco Plus and Micro+ are 510 threaded - which means you can use it with any oil cartridge with the same standard threading.

Double-click the button and your Peak will start heating up. It takes about 20 seconds for it to get up to temp, and will flash and vibrate three times when it's ready to go. Inhale slowly and enjoy! If you want to extend the session before it ends, double click to add another 15 seconds of heating.

Choose any from of our wide range of vaporizers to get the best expression of concentrates, or hash.

The Puffco Proxy^TM is a compact vaporizer for cannabis concentrates that puts top-tier technology and unmatched versatility in the palm of your hand. With a single-button interface and innovative 3D Chamber, exploring the magic of hash has never been easier. Possibility, powered by Proxy – make hash yours.

The Distillate Syringe can easily dosed directly into the Puffco Plus bowl, no tool required.

The TSA Guidelines in a Nutshell

The TSA allows travelers to bring vaporizers onto planes if they pack them in carry-on luggage. Stashing vaping devices in checked luggage is against TSA policy and could lead to problems. Legal vaping cartridges can be stored in checked baggage.

The result was the Peak, a sleek electric bong that uses "intelligent" temperature calibration to heat up in 20 seconds. The Peak retails from $379.99 on Puffco's website.

How much concentrate should I use? ›

For edibles, the recommended starting dose is 5 to 10 mg of THC to gauge the effects. With dabs, however, portioning a 5 mg dab is impossible. For example, with a concentrate containing about 800 mg of THC, a peppercorn-sized dab would contain about 25 mg of THC, five times the recommended starting dose for edibles.

The rainbow light is an indication that there is a connection issue between the base and atomizer & does not necessarily mean that anything is broken or defective. The first tip is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso, and reattach the atomizer.

Purchasers should note that atomizers are replaceable parts with an expected life of 1 – 3 months, depending on usage, and they require regular cleaning to maintain functionality.

The PG:VG ratio of your e-liquid can contribute to your atomizer heads life, especially with low resistance atomizers. Sub-ohm coils heat up much quicker than those with a higher resistance. If your e-liquid has a thinner consistency then the atomizer head can vaporize it too quickly, causing premature burning.

Depending on your vaping habits, you'll usually need to replace your coil every 7-21 days. This is assuming you're not vaping relentlessly and you're using good-quality coils.

Once charged, click once to cycle through the four color-coded heat settings -- blue (450 degrees F), green (500 degrees), red (550 degrees), and white (600 degrees) -- then double click the same button to activate the heating element.

The Puffco Peak has four pre-determined temperature settings that step up in 50° increments, varying from 450/500/550/600°F, or 232/260/288/315°C.

The vapor quality of the Puffco Peak Pro is great. The atomizer can handle more concentrate than the Peak, as the bowl is 40% larger. The original Peak had a problem with large loads, but the Pro has no trouble at all with the new atomizer.

Simply plug the base of your device into a wall outlet via the USB C charger included with your Peak. While charging, the white light will pulse and the light will automatically turn off once the device is fully charged. A depleted battery will fully charge in approximately 2.5 hours.

Why is my peak pro flashing red while charging? ›

Not to worry, this simply means that the device has overheated. Simply let the Peak cool down for a little while and normal functionality/charging will resume.

Simply double click while in use and the heat will automatically increase and your cycle will extend. Still not enough? Double click as many times as you want to keep the session going!

And while that popping/crackling sound can be unnerving — it's a battery-operated device after all — there's nothing to worry about. It's the physics of things — e-liquid meets the hot atomizer coil and starts evaporating rapidly. This doesn't happen in silence.

The answer is yes, you can use 70% alcohol to clean the Puffco Peak Pro. However, we do recommend 99%. Alcohol is an effective disinfectant and can be used to remove dirt, oil, and residue from the device.

The Peak will automatically turn itself off after about 10 seconds to conserve battery but can quickly be reactivated with another double-click. You can keep clicking for the duration of your session and the Peak will maintain the same temperature throughout.

If a valid warranty claim is made during the Limited Warranty Period, Puffco will repair or replace, at its option, any defective Product free of charge. Replacement products may be a refurbished or a reconditioned Product of the same model. All Products and parts that are replaced become the property of Puffco.

Drop the oven chamber and the dart in some rubbing alcohol and let them soak for a few hours. This Puffco Plus is ready for a deep cleaning! In the meantime, dip a cotton swab in some rubbing alcohol and swab any sticky gunk off the inside of the metal mouthpiece housing.

STEP 1: Get a Puffco Device

Choose any from of our wide range of vaporizers to get the best expression of concentrates, or hash.

Puffco recommends 99% Isopropyl Alcohol because lower percentages have a higher water content which “could potentially cause issues”.

The best cleaning solution to clean your Peak and Peak atomizer is 99% Isopropyl Alcohol. The reason we suggest 99% Isopropyl Alcohol specifically is because lower percentages of Isopropyl Alcohol have water content that could potentially cause issues.